Stock #: 2001720
Table Size: 50" x 10"T-Slots (Number x Width x Pitch): 3" x 5/8" x 2 1/2"Movement of Ranges (X,Y,Z Axis): 32" x 16-1/2" x 16.5"Maximum Quill Travel: 5"Quill Diameter: 100mmSpindle Taper: #40Speed Range: 60 - 4200 RPMMax. Part Height: 16"Spindle to Column: 7" - 31"Quill Feeds Per Revolution of Spindle: .04/.08/.15Head Tilt: +/- 45 Deg.Head Swivel: +/- 90 Deg.Spindle Motor: 5 HPMax. Weight of Workpiece: 850 lbsDrilling Mild Steel: 1 1/2" Dia.Tapping: 1"Millng (Metal Removal Rate/Mild Steel): 2-3" Min.Voltage: 220V or 440VPhase/Cycle: 3 Phase/60HzCurrent: 7 AMPApprox. Dimensions: 92"H x 56"W x 33"LApprox. Weight: 3,630 lbsTrak A.G.E. 2 3-Axis DRO Control10" x 50" T-Slot TableServo MotorsBall ScrewsAuto Power FeedCross FeedLongitudinal FeedOne Shot Lube115V-60Hz 15 amps9" CRTRS 232 PortBuilt in Floppy Disk StorageManual
STOCK # 2001720
Table Size: 50" x 10"
T-Slots (Number x Width x Pitch): 3" x 5/8" x 2 1/2"
Movement of Ranges (X,Y,Z Axis): 32" x 16-1/2" x 16.5"
Maximum Quill Travel: 5"
Quill Diameter: 100mm
Spindle Taper: #40
Speed Range: 60 - 4200 RPM
Max. Part Height: 16"
Spindle to Column: 7" - 31"
Quill Feeds Per Revolution of Spindle: .04/.08/.15
Head Tilt: +/- 45 Deg.
Head Swivel: +/- 90 Deg.
Spindle Motor: 5 HP
Max. Weight of Workpiece: 850 lbs
Drilling Mild Steel: 1 1/2" Dia.
Tapping: 1"
Millng (Metal Removal Rate/Mild Steel): 2-3" Min.
Voltage: 220V or 440V
Phase/Cycle: 3 Phase/60Hz
Current: 7 AMP
Approx. Dimensions: 92"H x 56"W x 33"L
Approx. Weight: 3,630 lbs
Trak A.G.E. 2 3-Axis DRO Control
10" x 50" T-Slot Table
Servo Motors
Ball Screws
Auto Power Feed
Cross Feed
Longitudinal Feed
One Shot Lube
115V-60Hz 15 amps
9" CRT
RS 232 Port
Built in Floppy Disk Storage
Manual
